Tianjin Jinhai Special Coatings & Decoration Co., Ltd.
Tianjin Jinhai Special Coatings & Decoration Co., Ltd.
Contact Us

Acrylic Road Marking Paint

Acrylic road marking paint is prepared by adding UV-resistant pigments and wear-resistant pigments to thermoplastic acrylic resin, and then adding quick-drying solvent after grinding. The acrylic road marking paint film dries quickly, has good weather resistance and abrasion resistance. It is widely used in asphalt and cement roads, bus stations, parking lots, garages, exterior walls, roofs, etc.


Advantages of Acrylic Road Marking Paint

  • Fast drying, good adhesion, excellent resistance to UV

  • Good outdoor durability, lower temperature application

  • Excellent abrasion resistance


Specification of Acrylic Road Marking Paint


Type

Solvent

Solid Content

60%

Mixing Ratio

One component

Dry Film Thickness

80μm per coat

Specific Gravity

1.4kgs/Liter

Coverage Rate (Theoretical)

0.25kg/m2/80μm   0.179L/m2/80μm

Drying Time

Temperature


10℃

20℃

30℃


Dry to touch


25mins

15mins

10mins


Dry Hard


1hrs

45mins

30mins

Package

20kgs bucket


What is the difference between normal temperature road marking paint and thermoplastic road marking paint?

What is the difference between normal temperature road marking paint and thermoplastic road marking paint?

Normal temperature road marking paint: environmentally friendly, without a lot of harmful solvents. Due to the brittleness of normal temperature solvent-based coatings, it cannot be combined with glass beads well, resulting in no long-lasting reflective effect. The construction equipment is easy to clean and maintain. It is non-flammable, non-toxic, and has high construction safety. It is suitable for urban roads and secondary roads, as well as factories, residential quarters, ports, parking lots, airports, etc.

Thermoplastic road marking paint: When the temperature is high, the glass beads are easy to fall off and quickly lose their reflective effect. It is basically similar to the construction method of normal temperature road marking paint, without heating, low energy consumption, low construction risk factor, high efficiency and fast speed. It is easy to recoat, without removing the old markings. Mainly used on highways and expressways above level 2. The thickness of the marking coating drawn by this kind of paint is (1.5~2.5)mm, and the paint is mixed with reflective glass beads, and when the marking is applied, the surface is sprinkled with reflective glass bead.


What is the difference between normal temperature road marking paint and thermoplastic road marking paint?
What is the difference between normal temperature road marking paint and thermoplastic road marking paint?
What is the difference between normal temperature road marking paint and thermoplastic road marking paint?
Recommended Fuxi Paint Products
Products
Your inquiry will be highly valued and answered within 12 hours.
Your Name
Email
country
Company
Content
Contact Us
Contact Us
FUXI® COATINGS, YOUR BEST CHOICE Contact Us