Epoxy phenolic paint is a two-component product, a special paint composed of epoxy resin, phenolic resin, pigment fillers, additives, solvents, etc., and curing agents. It can be divided into epoxy phenolic primer and epoxy phenolic finish.
It is used as an anticorrosive finish for steel and as an anticorrosive coating on concrete surfaces. It is widely used on the surface of various light metal and cement structures indoor and outdoor. Epoxy phenolic paint can be used as an anti-corrosive paint for the inner wall of storage tanks containing the following liquids: crude oil, 200# solvent oil, gasoline, diesel, kerosene, heavy oil, and lubricating oil. And it can also be used as an anti-corrosive coating on the outer wall of steel equipment and pipelines with an insulation layer under dry heat of 200℃.
Excellent anti-corrosion performance
Good mechanical properties, tough paint film, impact resistance
Has good adhesion, flexibility, abrasion resistance and sealing performance, etc.
Good mechanical properties, electrical insulation properties, stray current resistance, heat resistance and temperature resistance
Strong resistance to microbial erosion and high impermeability.
Has good acid resistance, heat resistance, water resistance and oil resistance.
Type | Solvent | ||||
Solid Content | 80% | ||||
Mixing Ratio | two components base : hardener=5:1 by weight | ||||
Dry Film Thickness | 50μm per coat | ||||
Specific Gravity | 1.42kgs/Liter | ||||
Coverage Rate (Theoretical) | 0.12kg/m2/50μm 0.085L/m2/50μm | ||||
Drying Time | Temperature | 10℃ | 20℃ | 25℃ | |
Dry to touch | 3hrs | 2hrs | 1hr | ||
Dry Hard | 18hrs | 16hrs | 12hrs | ||
Package | 24kgs for one kit, part A 20kgs, part B 4kgs | ||||
It has very good acid resistance, liquid acid resistance and acid mist, etc. The coating film is with dense coating structure, resistant to most solvents, and protect the substrate from corrosion. It has excellent crude oil resistance, can protect the storage tank, avoid the corrosion of crude oil impurities. The highest resistance to dry heat is 300°C. The epoxy phenolic paint is also with good wear resistance, impact resistance, excellent hardness.
Epoxy phenolic primer can be used as the primer and waiting for 24 hours after application until the primer is thoroughly dry. High-pressure airless spraying is recommended for coating epoxy phenolic topcoat. The total coating film thickness should be greater than 300 microns, which has a better protective effect on the inner wall.
English
français
Deutsch
Español
italiano
русский
português
العربية
tiếng việt
Polska
Ελλάδα
